| FAA Standard Remote ID |
Yes Ships with Remote ID preinstalled and configured for FAA Standard Remote ID compliance. |
|---|---|
| FAA BVLOS | Compliant for Beyond Visual Line of Sight (BVLOS) operations. |
| FCC DA 25-1086 |
Yes Alta X Gen2 ships with FCC-approved critical components. |
| NDAA Compliance |
Overall Bundle: ✖ Not Compliant Alta X Gen2 Drone: ✔ Compliant Pilot Pro Controller: ✔ Compliant Herelink Radio Link: ✖ Not Compliant |
| DIU Blue Compliance |
Overall Bundle: ✖ Not Certified Alta X: ✖ Not Compliant Pilot Pro Controller: ✔ Compliant Herelink Radio Link: ✖ Not Compliant |
| Application | Ideal for heavy-lift multi-rotor applications requiring integrated payloads. |
|---|---|
| Included | Medium Skid Landing Gear, 12 mm Payload Rails, and Smart Dovetail supporting payloads up to 1.5 kg. |
| Travel Case | Heavy-duty wheeled travel case with payload mounts installed. Fits the aircraft with skid landing gear attached. |
| Controller | Pilot Pro Controller pre-installed with Alta X Gen2 AMC flight software and Herelink radio modules. |
| Battery Type | Lithium Polymer |
|---|---|
| Capacity | 16 Ah |
| Voltage | 44.4 V |
| Connector | AS150U (Anti-spark) |
| Communication Protocol | CAN |
| Bluetooth | No (Custom TATTU build for DoD/DIU compliance) |
| Max Continuous Discharge | 15C |
| Max Burst Discharge | 30C |
| Max Charge Voltage | 4.2 V per cell |
| Minimum Discharge Voltage | 3.0 V per cell |
| Dimensions | 217 × 150 × 80 mm (8.5 × 5.9 × 3.1 in) |
| Weight | 4.25 kg per battery / 8.5 kg per pair (flight-ready) |
| AC Input | 100–240 V, 50/60 Hz, 15 A |
|---|---|
| Max Charge Power | 3200 W @ 240 V / 1600 W @ 120 V (shared across both channels) |
| Max Discharge Power | 70 W × 2 |
| Max Discharge Current | 3 A |
| Charge Current | 10 A, 15 A, or 20 A per channel |
| Supported Batteries | LiPo 6S–14S |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Connectivity | USB Micro (Firmware Upgrade) |
| Dimensions | 216 × 276 × 154 mm (8.5 × 10.9 × 6.1 in) |
| Weight | 6 kg (13 lbs) |
| Compatibility | Compatible with all modern Alta X aircraft using M4 fasteners. |
|---|---|
| Configuration | CW & CCW Single Motor Propeller Sets |
| Performance | Reduces peak vibration levels to approximately one-fifth of conventional propellers for improved flight performance and reliability. |
| Included | Replacement bumpers for improved stowage orientation. |
Note: The Alta X Gen2 Flight Batteries are custom-built by TATTU without Bluetooth functionality to meet DoD/DIU compliance requirements.
| Travel Case | 1 × Alta X Gen2 travel case with custom modular insert |
|---|---|
| Aircraft | 1 × Alta X Gen2 with ActiveBlade propellers and Herelink radio installed |
| Hex Drivers | 2 mm, 2.5 mm, and 3 mm (1 each) |
| Prop Straps | 4 × Velcro prop straps |
| Spare Parts | 1 × Spare parts kit |
| Controller | 1 × Pilot Pro Controller with Herelink radio installed |
| Landing Gear | 1 × Medium Skid Landing Gear (mounts installed) |
| Payload Mount | 1 × 12 mm Rail Payload Mount Kit (installed) |
| Flight Batteries | 6 × Alta X Gen2 12S Flight Batteries (3 pairs) |
| Battery Charger | 1 × Tattu TA3200 Dual-Channel Smart Charger (charges two batteries simultaneously) |
| Replacement Propellers | 1 × CW ActiveBlade Set & 1 × CCW ActiveBlade Set |
| RGB Sensors |
Freefly LR1 Payload (NDAA/Blue) Supported Lenses: • Sigma 24mm F3.5 (included) • Sony FE 35mm F2.8 • Sony FE 50mm F1.8 • Samyang 75mm F1.8 Sentera 65R Sensor (NDAA) |
|---|---|
| Thermal Sensors |
• Freefly LR1 Thermal Upgrade* (NDAA) • Sentera 6X Thermal Sensor** (NDAA) • Sentera 6X Thermal Pro** |
| Multispectral Sensors | Sentera 6X Multispectral Sensor** (NDAA/Blue) |
| Distance Sensors | Freefly LR1 Laser Range Finder Upgrade* (NDAA) |
| LiDAR |
• Freefly Flux L1 (optional GNSS Mount) • Freefly Flux O1 (optional GNSS Mount) (NDAA) • Freefly Flux H1 (optional GNSS Mount) • Emesent Hovermap ST-X** |
| Power Solutions | Batteries, Chargers & Adapters |
| Payload Interface |
• Payload Vibration Damper • Alta X Short Quick Release Mount • 12 mm Rail Payload Mount Kit (Alta X) |
| Landing Gear & Mounting |
• Landing Gear Ecosystem • Mounting Options |
| Replacement Parts |
• RTK GPS Ground Station • CW Single Motor Propeller Set for Alta X • CCW Single Motor Propeller Set for Alta X • CW Single Motor Propeller Set with ActiveBlade (M4 Fasteners) • CCW Single Motor Propeller Set with ActiveBlade (M4 Fasteners) |
| Not Compatible |
• CW Single Motor Propeller Set with ActiveBlade (M12 Motors) • CCW Single Motor Propeller Set with ActiveBlade (M12 Motors) |
| Notes |
* LR1 Laser Range Finder Upgrade (910-00841) and LR1 Thermal Upgrade (910-00840) require the LR1 Payload and cannot be used on Astro without it. ** Existing Sentera sensors from previous applications may require an updated ILS mount for Gen2. |
Experience better flight performance and reliability. The Gen2 utilizes cutting-edge ActiveBlade propellers (CW and CCW) that dynamically reduce peak vibration levels to just 1/5th of their normal level, ensuring exceptionally smooth data capture for sensitive payloads.
Take total control of the airspace. The included Pilot Pro controller comes pre-installed with Alta X Gen2 AMC flight software. Note: Pilot skill with Manual Mode is required for Emergency Procedures.
Maximize your operational tempo. The kits include six 44.4V 16Ah Lithium Polymer batteries (custom-built without Bluetooth for DoD/DIU compliance). Rapidly recharge your fleet with the Tattu TA3200 Dual-Channel Smart Charger, delivering up to 3200W of charging power to replenish two batteries simultaneously.
Fly legally and safely. The Alta X Gen2 ships with Standard Remote ID preinstalled for immediate FAA compliance, including Beyond Visual Line of Sight (BVLOS) readiness. The platform utilizes FCC DA 25-1086 approved critical components.
| FAA Standard Remote ID |
Yes Ships with Remote ID preinstalled and configured for FAA Standard Remote ID compliance. |
|---|---|
| FAA BVLOS | Compliant for Beyond Visual Line of Sight (BVLOS) operations. |
| FCC DA 25-1086 |
Yes Alta X Gen2 ships with FCC-approved critical components. |
| NDAA Compliance |
Alta X Gen2 Drone: ✔ Compliant Pilot Pro Controller: ✔ Compliant Herelink Radio Link: ✖ Not Compliant |
| DIU Blue Compliance |
Alta X: ✖ Not Compliant Pilot Pro Controller: ✔ Compliant Herelink Radio Link: ✖ Not Compliant |
| Application | Heavy-lift multi-rotor applications with integrated payloads requiring NDAA compliance. |
|---|---|
| Included | Medium Skid Landing Gear, 12 mm Payload Rails, Smart Dovetail (supports payloads up to 1.5 kg). |
| Travel Case | Heavy-duty wheeled case that stores the aircraft with skid landing gear installed. |
| Controller | Pilot Pro Controller pre-installed with Alta X Gen2 AMC flight software and Doodle Labs radio modules. |
| Battery Type | Lithium Polymer |
|---|---|
| Capacity | 16 Ah |
| Voltage | 44.4 V |
| Connector | AS150U (Anti-spark) |
| Communication | CAN |
| Bluetooth | No (DoD/DIU compliant) |
| Continuous Discharge | 15C |
| Burst Discharge | 30C |
| Max Charge Voltage | 4.2 V per cell |
| Minimum Discharge Voltage | 3.0 V per cell |
| Dimensions | 217 × 150 × 80 mm (8.5 × 5.9 × 3.1 in) |
| Weight | 4.25 kg per battery / 8.5 kg per pair |
| AC Input | 100–240 V, 50/60 Hz, 15 A |
|---|---|
| Max Charge Power | 3200 W @ 240 V / 1600 W @ 120 V |
| Max Discharge Power | 70 W × 2 |
| Max Discharge Current | 3 A |
| Charge Current | 10 A, 15 A, 20 A per channel |
| Supported Batteries | LiPo 6S–14S |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Connectivity | USB Micro (Firmware Upgrade) |
| Dimensions | 216 × 276 × 154 mm (8.5 × 10.9 × 6.1 in) |
| Weight | 6 kg (13 lbs) |
| Compatibility | All modern Alta X models with M4 fasteners. |
|---|---|
| Performance | Reduces peak vibration levels to approximately 1/5 of standard propellers. |
| Included | CW & CCW propeller assemblies with replacement stowage bumpers. |
| Travel Case | 1 × Alta X Gen2 travel case with custom modular insert |
|---|---|
| Aircraft | 1 × Alta X Gen2 NDAA (with ActiveBlade propellers and Doodle Labs radio installed) |
| Hex Drivers | 2 mm, 2.5 mm, and 3 mm (1 each) |
| Prop Straps | 4 × Velcro prop straps |
| Spare Parts | 1 × Spare parts kit |
| Controller | 1 × Pilot Pro controller with Doodle Labs radio installed |
| Landing Gear | 1 × Medium Skid Landing Gear (mounts installed) |
| Payload Mount | 1 × 12 mm Rail Payload Mount Kit (installed) |
| Flight Batteries | 6 × Alta X Gen2 12S Flight Batteries (3 pairs) |
| Battery Charger | 1 × Tattu TA3200 Dual-Channel Smart Charger (charges two batteries simultaneously) |
| Replacement Propellers | 1 × CW ActiveBlade set & 1 × CCW ActiveBlade set |
| RGB Sensors |
Freefly LR1 Payload (NDAA/Blue) Supported Lenses: • Sigma 24mm F3.5 (included) • Sony FE 35mm F2.8 • Sony FE 50mm F1.8 • Samyang 75mm F1.8 Sentera 65R Sensor (NDAA) |
|---|---|
| Thermal Sensors |
• Freefly LR1 Thermal Upgrade* (NDAA) • Sentera 6X Thermal Sensor** (NDAA) • Sentera 6X Thermal Pro** |
| Multispectral Sensors | Sentera 6X Multispectral Sensor** (NDAA/Blue) |
| Distance Sensors | Freefly LR1 Laser Range Finder Upgrade* (NDAA) |
| LiDAR |
• Freefly Flux L1 (optional GNSS Mount) • Freefly Flux O1 (optional GNSS Mount) (NDAA) • Freefly Flux H1 (optional GNSS Mount) • Emesent Hovermap ST-X** |
| Power Solutions | Batteries, Chargers & Adapters |
| Landing Gear & Mounting |
• Landing Gear Ecosystem • Mounting Options |
| Replacement Parts |
• Replacement Parts (Full List) • CW Single Motor Propeller Set • CCW Single Motor Propeller Set • CW Single Motor Propeller Set with ActiveBlade (M4 Fasteners) • CCW Single Motor Propeller Set with ActiveBlade (M4 Fasteners) |
| Not Compatible |
• CW Single Motor Propeller Set with ActiveBlade (M12 Motors) • CCW Single Motor Propeller Set with ActiveBlade (M12 Motors) |
| Notes |
* LR1 Laser Range Finder Upgrade (910-00841) and LR1 Thermal Upgrade (910-00840) require the LR1 Payload and cannot be used on Astro without it. ** Existing Sentera sensors from previous applications may require an updated Gen2 ILS mount. |
With an in-house team of drone experts with real-world mission experience across every sector, we can help you identify the best drone platforms and solutions that align with your specific goals.
Fill out the form and our team will get back to you with the information you need.
